Call us on: 01202 717191

CAME BPT MTM GSM Modular Audio Intercom Kit with Keypad

Product Details Price Buy
MTM 1 Button,Keypad, Surface Mounted
MTM 1 button GSM audio intercom kit with keypad, surface mounted. 1 gate, 1 house entry solution
£697.00+vat

£836.40 inc.vat
MTM 2 Button, Keypad, Surface Mounted
MTM 2 button GSM audio intercom kit with keypad, surface mounted. 1 gate, 2 house entry solution
£701.00+vat

£841.20 inc.vat
MTM 1 Button, Keypad, Surface Mounted, Vandal Resistant
MTM 1 button GSM audio intercom kit with keypad, surface mounted and vandal resistant. 1 gate, 1 house entry solution
£824.00+vat

£988.80 inc.vat

Kit Contents

Modular intercom range so all kits vary depending on configuration

 

CAME BPT MTM GSM Modular Audio Intercom Kit with Keypad

 

The CAME BPT MTM GSM entry panel is the ideal solution when wiring or distance is an issue, or when you cannot connect directly to a receiver.

Entry panels are installed in "stand-alone" mode, that is, by connecting them to a power-supply unit and to the antenna for receiving the GSM signal.

The MTM modular panel is entirely programmed via SMS text messages. Once you have fitted the SIM card, the system is fully operational and the whole entry system is managed over the smartphone via SMS and calls.

By pressing the call button, the panel triggers a call to either mobiles or landlines from which users reply and by using key-combinations can open the front door, gate or barrier.

Main Features

  • 2 Release outputs available
  • Adjustable ring time, call conversation, lock release and volume parameters
  • Up to 5 telephone number call diverts per button (unanswered or engaged call)
  • Programmable via SMS
  • Up to 2000 pin codes (keypad version) with remote code change feature
  • Choice of either Blue or White illumination with adjustable brightness

Flush Mounted

At just 13 mm thick, you will only notice MTM for its looks, with a flush-mounted MTM panel. MTM's compatibility with other manufacturers standard size recess boxes, makes MTM upgrades even easier! Thickness: 40 mm Width: 130 mm 226mm Thickness: 13 mm

Surface Mounted

When its not possible to flush-mount MTM, you can opt for our surfacemounting box. It provides high level protection from shock and water damage, thanks to its rain shield.

Vandal Proof

All of the functions of the standard version but with a vandal resistant construction. The profile and front facias are made entirely of Zamak composite and include crush resistant buttons and security screws. We are offering you the best in durability while keeping all of the benefits provided in our standard version. The MTM VR can resist up to IK09 level shocks and has an IP54 protection rating.

 

Need additional configurations or advice on this item? Call our sales support team on 01202 717191

Kit Contents

Modular intercom range so all kits vary depending on configuration
Proteco Price Match Promise Order before 3pm Why buy from us? Gate Safe

Gate Automation

Please select what type of automation you require for your gate/s. Double & Single Swing refer to motors which attach to the gate and pillar of a swing motion gate. Double & Single Underground refer to motors which lay beneath the ground which attach to the hinge end of swing motion gates. Choose Sliding if you require lateral moving gate automation and Wheeled if you require a motor which utilises a wheeled motor to drive your gate/s.

Motor Voltage

There are two types of power outputs to consider - 24v & 230v. If you need a higher number of operations (opened/closed more than 5-6 times in an hour) during peak periods such as the morning and evening, then you may wish to consider a 24v system.

24v systems are more suitable for higher operation levels as they tend to run cooler than 230v gate motors. However, they do cost more in relative terms, so if you only need to open or close the gate 1-5 times an hour then a 230v system might prove more cost-efficient.

24v motors tend to be used on commercial premises, whereas 230v tend to be used on standard domestic properties. The exception to this rule is sliding gate motors where the reverse is true - 24v sliding gate automation systems tend to be for domestic use, 230v for more intense use (commercial/communal).

24v systems can draw power from battery backup systems meaning they can still operate during any mains power cut (a 230v or 3 phase system would need to be opened with a manual release key).

24v systems can also utilise solar power units as a means of charging batteries, allowing you to site gate automation in rural and remote locations where mains power is unavailable.

Specifications can be found for each product from their datasheet. Each datasheet is downloadable from each product page on this website.

Weight of Gate

All electric gate motors operate up to a maximum weight. This is so the gate will operate in a reliable and safe manner. It is essential to know the weight of each gate leaf in order to choose the correct motor for you installation. If you do not know the weight of your gate/s, send us a photo along with the gate/s dimensions and we can advise.

Gate Width

As with weight, gate motors are designed for gates within certain dimensions. The most important dimension is the width of the gate. To ensure you select the right motor to operate your gate you must know the width of each gate that requires automation.

Opening Angle

Each motor has a maximum angle to which it can operate to. Therefore it is important to note how far the gate needs to open in order for a vehicle to enter/exit safely.

Daily Use

The amount of times your gate is used per day is a determining factor when deciding on the right motor for your usage. Motors are designed to operate within a certain capacity (operations per day) so choosing a motor compatible with your desired use is essential for its durability. Select from the options below the number of times (open & closure = 1 x operation) the gate/s will be operated on an average day.